HJF290 Injection Molding Machine
1.It adopts imported computer for plastic injection machine , with large screen .High definiyion crystal display and human-computer interface in different languages.Through CPU independent control and individual treatment.It has raised the running speed of thr control system and alarming of successive oil temperature , thus I,proving the operating speed of the machine.
2.Closed loop temperature control system to ensure the accuracy and reliability of the barrel temperature .The functions of cold proof boot, alarming and parameter memory for the molding, with password protection.The injection and switch are controlled by imported ruler.
FEATURES
1.Equiped with servo motor ,
2.Closed loop control for pressure and flow .
3.Low noise,
4.High precision
5.Energy saving
Electronically Controlled Unit
1.CPU controller and display are independent and reliable.
2.A larger color LCD screen enhances clear display and supports multi-language compatibility.
3.The control system also supports remote monitor. In the event of a control problems, the machine can be connected to internet through a special interface. Inject service can realize remote fault diagnosis and maintenance.
4.A screen saver function extends the LCD life.
5.Ultra bright LED is provided for input and output point inspection. Proving convenient indication of the machine’s operation and machine service
6.A data hardware lock is provided to prevent unauthorized people from effecting the machines performance.
7.Closed Loop PID barrel temperature control.
8.Dust and waterproof control cabinets provide a neat and tidy enclosure all electrical control components.
| SPECIFICATION |
HJF290 |
| Screw Type |
A |
B |
C |
| Screw Diameter |
Mm |
95 |
105 |
115 |
| Screw L/D Ration |
L/D |
23 |
22 |
20 |
| Shot Size(Theoretical) |
cm3 |
3613 |
3972 |
5294 |
| Injection Weight(PS) |
g |
3251 |
3972 |
4765 |
| Injection Rate |
g/s |
580 |
708 |
850 |
| Injection Pressure |
MPa |
210 |
162 |
133 |
| Screw Speed |
rpm |
115 |
| Clamping Force |
KN |
10000 |
| Opening stroke |
Mm |
1100 |
| Space Between Tie Bars |
mm |
1120*1020 |
| Max.Mold Height |
mm |
1100 |
| Min.Mold Height |
mm |
500 |
| Ejector Stroke |
mm |
350 |
| Ejector Tonnage |
KN |
200 |
| Max.Pump Pressure |
MPa |
16 |
| Pump Motor Power |
KW |
45+45 |
| Heater power |
KW |
58 |
| Machine Dimension(L*W*H) |
M |
12*2.8*3.14 |
| Machine weight |
T |
45 |
| Oil Tank Capacity |
L |
1800 |
Haijiang Machinery Main configuration
Standard machinery
| PLC |
PORCHESON (TAIWAN) |
| Vane Pump |
Albert (USA) |
| Directional Valve |
Northman(TAIWAN) /Yuken(JAPAN)/Tokimec(JAPAN) |
| Proportional Valve |
HNC (TAIWAN) |
| Electric Motor |
Qianlima (CHINA ) |
| Contactor |
LS (KOREA) |
| Plasticizing Oil Motor |
STF(CHINA) |
| Air Breaker |
LS (KOREA) |
| Thermal Overload Relay |
LS (KOREA) |
| Limit Switches |
Omoron (JAPAN ) |
| Liner Position Sensors (Electric Ruler) |
Minor (China) |
| Lubrication Pump |
ChaoRun(China) |
Servo machinery
| PLC |
PORCHESON (TAIWAN) |
| Directional Valve |
Northman(TAIWAN) /Yuken(JAPAN)/Tokimec(JAPAN) |
| Air Breaker |
LS (KOREA) |
| SSR(solid state relay) |
Fotek(TAIWAN) |
| Plasticizing Oil Motor |
STF(China) |
| Limit Switches |
Omoron (JAPAN ) |
| Gear Pump |
SUMITOMO (JAPAN) |
| Servo Driver |
DELTA (TAIWAN) |
| Servo Sensor |
ASHCROFT(GERMAN) |
| Servo Motor |
Albert(USA)/Phase(ITALY) |
Product Tags:
|
|
plastic molding machine Images
|
